Pulse plating power supply used for the function of the coating is strongly convex at the solution and the whole flat. Double pulse electroplating power supply, the application needs to have precision in the tolerances of some special artifacts plating, and a number of DC power supplies, pulse plating can not be a single desired effect of the occasion, such as: connectors and pins, precision design, circuit board through-hole, microwave circuit boards, multilayer plating, etc. have a very good effect, applications continues to expand. 
 Features 
 ● Precision digital control pulse to provide the range 0.1-99.0ms positive pulse and 0.1-99.0ms reverse pulse, 
 Time-independent set 
 ● Accuracy: 0.1ms pulse period (T): 2 × 0.1ms-2 × 99.0ms output frequency is 5-5000Hz 
 ● Open the width of the positive pulse (Forward PW) and negative turn-on time to the pulse width (Reverse PW) can be respectively 
 Full-cycle regulation 
 ● forward current, forward voltage, negative current, negative voltage are set to an independent regulator, adjustment range: 0 - Rating 
 ● Output waveform: the standard square wave 
 ● current, voltage digital display 
 ● constant voltage, constant current control options 
 ● control of two-time controller: positive, negative pulse conversion cycle can be set to 1 second -99 hours, the time statistics, tips to complete the work of sound and light alarm function, auto-stop function to complete the work, time, pause, reset 
 ● Soft start and stop function and overcurrent, overvoltage, overheating, phase, lack of water, short circuit protection and automatic fault indication 
 Protection function 
 ● dynamic current sharing, automatic voltage current limiting, automatic pressure limiting function of steady flow 
 The main advantage 
 1. Plating fine crystal, bright, low porosity 
 2. Plating thickness uniformity, and good leveling 
 3. Elimination of hydrogen embrittlement, stress reducing coating 
 4. Improve the coating adhesion 
 5. Deposition speed 
 6. Coating temperature, wear, welding, toughness, corrosion, conductivity, finish and other performance indicators multiplied 
 Conservation of rare metals and significantly (20% -50%), saving additives (such as cyanide bright silver 50% -80%)